Tools / Flipper Zero

Flipper Zero

HARDWARE
Flipper Devices · Sub-GHz · RFID · NFC · Infrared
Project site ↗

Handheld multitool whose built-in CC1101 transceiver receives and transmits across the 300–348, 387–464 and 779–928 MHz sub-GHz bands — the everyday field radio for reading, saving and replaying garage/gate/doorbell remotes and other fixed-code devices, with no laptop or SDR. OOK/ASK and (G)FSK; its Read mode decodes known protocols and Read RAW captures unknown ones for later replay.

COMPATIBLE SOFTWARE & PROJECTS

Flipper Zero firmware SOFTWARE Flipper Devices repo ↗

The open-source firmware that runs the Flipper Zero's Sub-GHz app: Read (decode a known protocol), Read RAW (capture an unknown signal as raw timings), Save and Send (replay/emulate a saved signal), and a manual virtual-remote builder. The official firmware deliberately refuses to save or replay rolling-code signals (e.g. KeeLoq) as a built-in safety limit — capture-and-replay works on fixed-code devices, not rolling-code ones, on stock firmware.

USED IN THE WAYFINDER

Sub-GHz ISM / Remotes · LLSub-GHz ISM / Remotes · AT